Introduction
The Lab401 Pentester Pack is a curated collection of the must-have tools used by pentesters every day. With this pack, you are equipped to face virtually any pentest scenario you'll ever face: RFID Testing, cracking, sniffing, emulating, reading, writing, debugging, programming, SDR/RF Capture, Replay, Decoding.. BadUSB/Rubber Ducky attacks, Infrared, Wifi and more.
Updated with the latest generation tools as of July 2022.
Incredible value: save up to €145.00!
Which pack is right for me?
The Lab401 Pentester Pack has three tiers: Basic, Standard and Advanced, which correspond to different user requirements and budgets. Use our guide below to understand which pack is best suited to your needs.
-
Basic Pack
The most affordable way to get the minimum hardware required for RFID Pentesting work. Detect, manipulate and emulate Low-Frequency and High Frequency RFID systems without breaking the budget.
The Basic Pack is based on the Proxmark 3 RDV4.01.
-
Standard Pack
Built on the foundations of the Budget Pack, but builds on flexibility, portability and performance. The tools in the Standard Pack are portable and autonomous, allowing you to work faster both in the field and at the desk.
The Proxmark 3 is replaced with the iCopy-XS - a powerful, portable, Proxmark-powered RFID cloning and manipulation tool. The Basic + Intermediate iCopy-X card packs are included.
The Flipper Zero adds huge functionality in one pocket-sized tool: RFID reading, writing and emulation, RF/SDR Capture, Replay, Decoding and Analysis, BadUSB / RubberDucky, Infrared Capture, Replay and Universal Remote, and USB-Serial Debugging.
Lab401 recommends the Standard Pack for most clients.
-
Advanced Pack
The Advanced Pack includes full accessories for the iCopy-X and the Flipper Zero, The iCopy-XS Advanced Tag Pack allows for cloning of almost every possible type of RFID chipset, and the Flipper Zero accessories add WIFI attacks (deauth / capture / etc) and GPIO Development functionality.
Functionality at a glance
Each version of the Lab401 Pentester Pack has been optimised for a specific purpose. We've broken down the most important features of each pack below, so you can work out which pack you need to get the job done.
|
Basic |
Standard |
Advanced |
| RFID (LF & HF) |
| Frequency Detection |
✔ |
✔ |
✔ |
| Read / Write |
✔ |
✔ |
✔ |
| Emulate |
✔ |
✔ |
✔ |
| Crack / Decode / Demodulate |
✔ |
✔ |
✔ |
| Portable / Standalone |
|
✔ |
✔ |
| Autonomous / Auto Copy Mode |
|
✔ |
✔ |
| Advanced Card Writing |
|
|
✔ |
| RF (Sub GHz) |
| Spectrum Analyser |
|
✔ |
✔
|
| Frequency Scanner |
|
✔ |
✔
|
| Capture / Replay |
|
✔ |
✔
|
| Decode Fixed & Rolling Codes |
|
✔ |
✔
|
| Additional Functionality |
| BadUSB (DuckyScript compatible) |
|
✔ |
✔
|
| Infrared (Capture / Replay / Universal Remote) |
|
✔ |
✔
|
| USB-to-Serial Debugger |
|
✔ |
✔
|
| GPIO Development |
|
|
✔
|
| Wifi Attacks (Deauth / Capture etc) |
|
|
✔
|
What's included?
The Lab401 Pentester Pack has a curated selection of tools to meet your specific goals. The Basic Version delivers the minimum tools required to give a strong foundation in pentesting. The Standard Version focuses on portability, ease of use and additional functionality. The Advanced Pack aims to cover all possible scenarios with the smallest number of tools.
Please see the individual product pages for more information about each product.
|
Basic |
Standard |
Advanced |
| Standard Tools |
DL533N
LibNFC compatible USB thumbdrive for cross-platform reading/writing/cracking.
|
✔ |
✔ |
✔ |
RFID Field Detector
Rapidly detect and determine the frequency of LF and HF RFID readers.
|
✔ |
✔ |
✔ |
Multi-RFID Keyfob
Ultra-portable keyfob with 6 embedded UID-modifiable LF & HF RFID tags
|
✔ |
✔ |
✔ |
| Proxmark |
Proxmark 3 RDV4.01
Industry standard device for RFID manipulation, cracking, debugging and testing.
|
✔ |
|
|
Long Range HF + LF Antennas
Medium & Long-Range LF + HF antennas for the Proxmark
|
✔ |
|
|
SIM/SAM Adaptor
Manipulate SIM/SAM cards with this adaptor for the Proxmark
|
✔ |
|
|
| iCopy-X |
iCopy-XS
Portable Proxmark-based device specialised in the rapid cloning of RFID badges
|
|
✔ |
✔ |
Basic Card Pack
Must-have selection of the most common LF & HF Blank RFID cards.
|
|
✔ |
✔ |
Intermediate Card Pack
Pack of more specialised LF & HF RFID tags.
|
|
✔ |
✔ |
Advanced Card Pack
Pack of highly-advanced / high-security blankd RFID cards.
|
|
|
✔ |
| Flipper Zero |
Flipper Zero
The ultimate portable pentester multi-tool. RFID, RF/SDR, Infrared, BadUSB, GPIO, Bluetooth and more
|
|
✔ |
✔ |
32GB MicroSD Card
Flipper Compatible 32GB microSD card necessary to use the Flipper Zero.
|
|
✔ |
✔ |
Silicone Protective Case
High-quality soft-touch protective case for the Flipper Zero.
|
|
✔ |
✔ |
GPIO Protoboards
Hot-pluggable Dev boards are controlled directly Flipper for custom hardware
|
|
|
✔ |
Wifi Dev Board
Enables internet connectivity and wifi attacks (deauth, packet capture, etc)
|
|
|
✔ |
| Accessories |
| 5x MIFARE Classic® Compatible 1K UID Modifiable Coin Tags
|
✔ |
✔ |
✔ |
| Lab401 Stickers |
✔ |
✔ |
✔ |
The Lab401 Pentester Packs are built to meet the needs of all pentesters. Whether you're a hobbyist, getting started in the industry, confirmed professional or an LEA entity, the Pentester Pack has a version curated to meet your needs.
Each product in the Pentester Pack is covered by Lab401's two-year warranty and backed by our incredible customer support. Orders are packed, protected and shipped from our French warehouse. With door-to-door tracking, the Lab401 Delivery Guarantee and secure anonymous packaging, Lab401 is your trusted partner for pentesting hardware.
If you have any questions regarding the packs, or which pack is right for you, reach our to our excellent customer support : support@lab401.com
Lab401 Pentester Pack : Buy Now
