Flipper Zero

  • €169.00 €202.80
    Unit price per 

Powerful, pocket-sized. The Flipper Zero is the ultimate multi-tool for geeks, pentesters and hardware enthusiasts alike.

Product will be in stock within 7 days

Please note : This is the European Flipper, compliant with European / UK Radio Frequencies and standards. As such, this device cannot be shipped to North & South America, Asia, Oceania. If you have any questions, please contact contact customer support for more information.

Additional stock is scheduled to arrive early July.

Introduction

The Flipper Zero is the ultimate multi-tool for pentesters, geeks, ethical hackers and hardware hobbyists alike. One pocket-sized device combines multiple tools: RFID, RF, Infrared, HID emulation, GPIO, Hardware debugging, 1-Wire, Bluetooth, Wifi and more.

Inspired by great open-source projects: Proxmark, HydraNFC, Rubber Ducky, pwnagotchi - the Flipper Zero manages to pack serious functionality into a tiny, professionally manufactured device - and stays true to its Open Source roots.

Entirely independent, the Flipper Zero requires no external computer or hardware to function - everything is driven by the its 5-way navigation button and LCD screen. When connected to a computer or the included Android / iOS apps, the Flipper can be extended, modified, upgraded and reflashed according to your needs.

With over two years of meticulous design, prototyping and iteration, the Flipper Zero is a mature platform, ready to use out of the box, meeting the needs of professionals and enthusiasts alike.

Lab401 is the exclusive distributor for the Flipper Zero in Europe.

RF Transceiver

The Flipper One contains a fully-controllable RF platform, based on the TI CC1101 chip, allowing for RF Signal capture, analysis and transmission.

The Flipper One has a built-in library of common remote control algorithms for capturing, decoding and analysing and replaying signals.

Users have full access to the radio sub-system, allowing custom RF modules to be easily built.

RFID Reader/Writer/Emulator

The Flipper One allows for Reading, Writing and Emulation of both High-Frequency (13.56MHz) and Low-Frequency (125KHz) RFID tags.

Low Frequency tags can be easily read, saved, cloned to a new card, or exported for analysis.

Multiple High Frequency protocols are supported, and the Flipper One can be connected to a computer as a 100% compatible LibNFC device.

Infrared Transceiver

The Flipper One has a powerful, fully programmable IR transceiver for IR signal capture and replay.

Out of the box, it includes a fully featured signal library for hundreds of IR-controlled devices: TVs, Stereos, Air-Con, etc.

GPIO Pinouts

The GPIO Pinouts & Breakout boards allow for controlling electronics directly via the Flipper.

The Flipper can also be used as a USB to SPI/UART/I2C bridge for debugging, flashing and fuzzing.

HID Emulation

The Flipper Zero emulate HID devices (Keyboard, Ethernet, etc) over USB, allowing it to perform BadUSB / RubberDucky attacks.

Users can easily upload and deploy scripts directly from the device for task automation, pentesting and more.

U2F Security Token

The Flipper Zero is a fully-functional U2F Key, compatible with any U2F-enabled service: Google, Twitter, LastPass, etc.

Much stronger than traditional 2FA (SMS, Email), U2F ensures that your accounts are safe and secured by the Flipper One.

Open Source & Extendable

The Flipper Zero is 100% Open-Source & Open-Hardware, with firmware source, schematics, cross-platform SDKs and Desktop & Mobile tools available.

All hardware and firmware components of the device are available, allowing for complete customisation - from quick Arduino plugins to pluggable hardware modules.

iButton

The Flipper has built-in 1-wire contact points to read / write and emulate "iButton" tags (TouchMemory / Dallas Keys).

Keys can be saved, exported, written to new tags or directly emulated. The contact points act as a read and a proble simultaneously for intercepting 1-Wire data.

Expandable Storage

Every Flipper Zero has a microSD card slot, enabling up to 64GB of storage space for your RFID Tags, Remotes, Captured Signals, Plugins, Modules, etc.

Flipper uses the microSD card's SPI-interface, so it's important to only use on-brand, legitimate cards. The Standard & Complete Packs come with tested microSD cards direct from Kingston to save you time and money.

Wireless Functionality

The Flipper has inbuilt Bluetooth, allowing for direct communication with mobile apps, and supports Wifi via the Wifi-Development module.

As an extra bonus, multiple Flippers can communicate with each other over 433MHz, allowing your to find and chat with Flipper-equipped friends..

Flipper Community and Ecosystem

Flipper is backed by an incredibly talented and motivated team of engineers, programmers, hardware experts and artists, who are dedicated to building and maintaining a reliable, mature and long-term platform.

Beyond its hardware capabilities, Flipper stays true to its geek origins: Flipper, the tamagotchi-esque dolphin and product mascot lives inside each device. Flipper thrives on experience: the more you use the device, the happier he becomes: just don't forget him, or you might learn why dolphin have teeth..

The Flipper Zero is CE+FCC approved, robust built to withstand the bumps and bruises of daily use. Each device is backed by a 2-year warranty and Lab401's fantastic customer support, should you ever have a problem.

What's included

Basic Pack

  • 1x Flipper Zero
  • 1x USB-A - USB-C Cable

Standard Pack

  • 1x Flipper Zero
  • 1x Kingston 32GB microSD card
  • 1x Silicon Protective Case

Complete Pack

  • 1x Flipper Zero
  • 1x Kingston 32GB microSD card
  • 1x Silicon Protective Case
  • 1x Wifi Dev Board
  • 3x GPIO Prototyping Boards

Device Specifications

  • Screen: 128x64 1.4" LCD Monochrome (Backlit)
  • Tactile Controls: 5-Way Direction Pad + Select Button
  • Internal Battery: LiPo 2000mAh (7-days without charge)

  • CPU:
    • STM32WB55RG
    • ARM Cortex-M4 32-bit 64 MHz (Application Processor)
    • ARM Cortex-M0+ 32 MHz (Network Processor)

  • Buzzer: 100-2500Hz
  • Vibration Motor
  • Memory: 1024KB Flash, 256KB SRAM
  • Storage: MicroSD (Up to 64GB)
  • Connectivity: USB 2.0, Type-C

  • Dimensions: 100 x 40 x 25 mm
  • Weight: 102g

Module Specifications

  • RF:
    • Chipset: TI CC1101
    • Frequency bands: 315MHz, 433MHz, 868MHz, 915MHz
    • TX Power: 0dBm Max (~100m transmit range)
  • RFID:
    • High Frequency / 13.56MHz
      • ISO-14443A/B
      • NXP Mifare® Classic/Ultralight/DESFire/etc
      • FeliCa™
      • NFC Forum protocols
    • Low Frequency / 125KHz
      • Modulation: AM / PSK / FSK
      • Supported Cards: EM400x, EM410x, EM420x
      • HIDProx, Indala
      • T5577
  • GPIO:
    • 3.3v CMOS Level
    • 5V tolerant
    • Up to 20mA per digital pin
  • Infrared:
    • RX/TX Frequency: 800-950nm
    • TX Power: 300 mW
  • Bluetooth:
    • Bluetooth LE 5.0
    • TX Power: 0dBm Max
    • RX Sensitivity: -96dBm
    • Data Rate: 2 Mbps
  • iButton 1-Wire:
    • Dallas DS1990A
    • CYFRAL

Shipping & Packaging

  • Each Flipper Zero is dispatched from Europe - no need to worry about slow shipping times, import duties or damaged goods.
  • Packed in a sturdy compact 85x130x45mm box.
  • We provide worldwide shipping with express options.

Flipper Zero: Getting Started Videos

How to update the firmware on your Flipper Zero with 'qFlipper'

How to install and setup a microSD card in your Flipper Zero

 

How to Connect to your Flipper Zero via Bluetooth

SHIPPING & PACKAGING

Do you provide free shipping?

Yes:

For European Customers, orders over 100€ have free shipping.

For International Customers, orders over 250€ have free shipping.

Customers that qualify for free shipping can still select rapid shipping options.

When will I receive my order?

Average order times can be estimated below.

Average shipping estimates can be seen by selecting the destination country / region below.

While actual shipping times may vary - these estimations are built off our real delivery statistics. To receive an order as quickly as possible, we recommend:

  • Use the express delivery shipping method
  • Use same day shipment by placing the order before 12PM GMT+1

Do you ship internationally?

We ship world-wide, but due to logistical or legal restrictions, we are unable to ship to the following countries: Argentina, Brazil, Bolivia, Cambodia, Chile, Ecuador, Iraq, India, Kuwait, Liberia, Libya, Nepal, Oman, Panama, Peru, Russia, South Africa, Turkey.

Due to the current situation, shipping to the Ukraine is currently not possible.

Where do you ship from?

All items are dispatched from France. You will receive a tracking number upon item dispatch. The address used on your purchase is printed as a label - please double check your address to avoid mistakes.

When will my order be dispatched?

Lab401 dispatches orders Monday - Friday.
All orders placed before 12PM GMT+1 will be dispatched the same day. All orders placed after this cutoff time will be dispatched the next business day.

For example:

  • An order placed Friday, 9AM GMT+1 will be dispatched the same day.
  • An order placed on Friday, 6PM GMT+1 will be dispatched Monday.
  • An order placed on Saturday will be dispatched Monday

For any questions, please contact customer support.

What shipping options are available?

We provide four types of shipping:

  • EU Standard Post
  • EU Express Post
  • International Standard Post
  • International Express Post

How are import duties / customs handled?

For all European Union destinations, all shipments are DDP - Delivered Duty Paid. This means all applicable VAT/TVA, shipping costs and customs fees are pre-paid. 
You will not be charged by the courier service / post office or customs.

For all destinations outside European Union, all shipments are DDU - Delivered Duty Unpaid. This means that your country's custom service impose a VAT/TVA/Import Duty on your shipment.

I am charged VAT ?

Lab401 (ETOILE 401 SAS) is an EU-Registered entity. VAT is applicable to purchases delivered within the EU, with exceptions for VAT Registered entities.  VAT is calculated at checkout. For your convenience, you can browse Lab401 with prices Including VAT and Excluding VAT.

Sales are contractual

Please note - a purchase is an explicit agreement of our terms and conditions. Any products refused by clients will not be refunded.

Purchase Security Validation may be applied

To protect against credit card fraud, orders may be flagged for Purchase Security Validation. In this instance, we will reach out to the customer to perform a manual verification process.

Orders that are flagged for Purchase Security Validation are considered to be incomplete until validated. Our delivery deadline obligations begin only when an order is validated.

Delivery Protection

Is my delivery protected?

All Lab401 shipments are insured with the carrier.

We also provide an advanced insurance, Lab401 Delivery Protection.

Lab401 Delivery Protection means we remain fully responsible for the package right up to delivery. If the package is lost or damaged, the package can be resent immediately (48 business hours) upon receipt of proof.

For orders without Delivery Protection, lost or damaged packages will pass through the carrier's protocols, which can take up to 30 days.

For orders that are time-sensitive, we recommend Lab401 Delivery Protection.

Delivery Protection can be purchased at checkout easily and cheaply.
English