Skip to content
SignalSDR Pro

SignalSDR Pro

€1,100.00 - €1,100.00
€1,100.00 - €1,100.00

Portable powerhouse SDR Platform: Run & Audit 5G Base-Stations. Emulate USRP and ADALM-PLUTO hardware.
Outstanding hardware, performance and capabilities at an unmatched price.
🟢 In Stock
🟢 Dispatched today
Less than 40 minutues remaining for same-day shipping!
⬤ In Stock (🇪🇺 EU)
⬤ Dispatched
⏰ Order within for same day shipping

Introduction

The SignalSDR Pro is an industry-changing SDR platform: it meets and exceeds the performance and features of current flagship SDR devices at a fraction of their cost, while maintaining full compatability.

For pentesters: it's the first affordable platform for 5G auditing; working out of the box with Open5GS and 5ghoul-5g-nr-attacks.

For researchers and developers, the SignalSDR Pro has a killer feature: it leverages its FPGA to emulate other SDR platforms in hardware. All existing tools, software and workflows written for ADALM-PLUTO or USRP devices are fully compatible by changing the microSD card.

Discover the SignalSDR Pro

The SignalSDR Pro boasts industry-leading specs: 70MHz - 6GHz frequency range, 56MHz bandwidth, 12-bit sample depth at a sample rate of 61.44 MSPS, Dual Full-Duplex RX/TX Channels, 85k logic gates, and a TX power up to 10dBm.

With the same dimensions as a Raspberry Pi (the same footprint as a credit card) the SignalSDR Pro is tiny. It includes an anodized, CNC-machined aluminum protective case & heat-sink and unmatched connectivity: 4x USB, Gigabit Ethernet and 40 accessible GPIO pins.

 

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

1. Affordable 5G Audits (Finally!)

Run 5G Base Stations with Open5Gs and perform 5G audits via 5ghoul at half the price of other SDR platforms.

2. 70MHz - 6GHz Tuning Range

Huge frequency range without up/down convertors.

3. Emulate other SDR platforms

Got a preferred platform? Keep using it. The SignalSDR Pro emulates the USRP and ADALM-Pluto frameworks in hardware.

4. Huge connectivity

Gigabit ethernet, multiple USB ports (USB-C, Dual USB-OTG & USB 3.0) for unparalleled connectivity.

5. 40-Pin GPIO

The only SDR platform with full 40-pin GPIO: unlimited potential for deep integration.

6. Industry-leading performance

56MHz bandwidth, 12-bit sample depth, 61.44MSPS sample rate, Dual Full-Duplex RX/TX, 85k programmable logic gates.

Detailed functionality

SubGHz:

  • FPGA – AMD Zynq 7020 SoC FPGA  with 2x Arm Cortex-A9 hard cores and 85k logic gates
  • RF Chipset – Analog Devices AD9361
  • Channels – 2 Tx/ 2 Rx (Full Duplex)
  • Frequency Range – 70 MHz – 6 GHz
  • Max Sampling Rate: 61.44 MHz
  • Resolution: 12 bits
  • RF Bandwidth – 61.44 MHz
  • RF Transmit Power – Up to 10 dBm
  • Antenna connectors – 5x I-PEX connectors (1x GPS/analog)
  • GPSDO (~ 1 ppm oscillator precision)
  • Networking – Gigabit Ethernet RJ45 port
  • USB – 1x USB Type-C port, 2x Micro Type-B (OTG) port, 1x USB Type-B 3.0 port
  • Expansion – 40-pin GPIO header (unsoldered)
  • Boot Options – SD Card / Flash / JTAG
  • Debugging – USB-TTL / USB-JTAG
  • Dimensions – Raspberry Pi form factor

Software Compatibility:

  • Open5GS
  • yatebts
  • osmoBTS
  • OpenWiFi
  • OpenAirInterface
  • GNU Radio
  • MATLAB
  • LabView
  • DragonOS
  • LTE Sniffer
  • srsRAN
  • GPS Sim-SDR
  • GQRX
  • 5ghoul-5g-nr-attacks

Hardware Compatibility:

  • ADALM-PLUTO
  • USRP B210

What's included

  • 1x SignalSDR Pro
  • 4x 5G antennas (linearly polarized)
  • 1x Active GPS Antenna
  • 3x I-PEX-to-SMA cables
  • 1x USB Type-C cable
  • 1x MicroUSB Cable
  • 1x Gigabit RJ-45 Cable
  • 2x Writable, preloaded SIM Cards
  • 1x 32GB MicroSD Card

SignalSDR Pro Resources

    Official:

    Tutorials: