Skip to content
Feberis Pro

Feberis Pro

€79.00 - €79.00
€79.00 - €79.00

The only RF Pentesting Accessory you need for Flipper : RF, Wifi, BLE, IoT and GPS.
10x performance gains over FlipperZero's built-in modules.
🟢 In Stock
🟢 Dispatched today
Less than 40 minutues remaining for same-day shipping!
⬤ In Stock
⬤ Dispatched today

Introduction

The Feberis Pro is the ultimate Flipper Zero accessory for IoT pentesting. Its five integrated modules cover all common IoT frequencies, including Sub-GHZ (433+900MHz) and 2.4GHz, enabling pentesting functionality for across multiple protocols, including RF, Wifi, Bluetooth and more.

The Feberis Pro has full functionality out-of-the-box, and supports extended functionality via alternative firmware, and custom functionality via its open-source modules.

The Feberis Pro from SAPSAN is proudly European and built to last. Pre-release versions were field-tested and iterated upon, and are now used by multiple European Police, Law-Enforcement and Auditing teams.

Discover the Feberis Pro

Quick to deploy, the Feberis Pro is designed for rapid deployment and full-featured functionality to accompany you during all phases of RF pentesting, auditing and research.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

1. Dual Frequency Sub-GHz

Never miss a signal capture : features dual CC1101 SubGHz modules, allowing for rapid switching between frequencies.

2. WIFI + BLE Audit

Comprehensive, Long-range Wifi + BLE Auditing: AP & Beacon Detection + Spoofing, Sniffing, Packet Capture & Export, Wifi Deauth, and even EvilPortal & Pineapple Detection with custom firmware

3. Integrated GPS

The inbuilt GPS module enables recording pinpoint-accurate coordinates during war-driving sessions across all RF Modules.

4. 2.4GHz Auditing

Audit IoT peripherals operating on 2.4GHz with the dedicated nRF24 chipset and long-range antenna. Capture data, detect vulnerable devices, study protocols and build PoCs.

5. Complete IoT Auditing

Integrates five modules, covering standard IoT + RF Remote frequencies. Allows easy switching between modules, or simultaneous modules.

6. Long-Range Antennas

Each module has its own dedicated, optimised antenna, enabling hundreds of metres in line-of-sight performance. Optimised power consumption - no additional battery or power required.

7. Fully Software Support

Works out-of-the-box, no development required. Compatible with multiple firmware variants, and supports multiple internal firmware images for extended functionality.

8. Proven in the field

The Feberis family of tools are used and trusted by multiple European Law Enforcement and Auditor teams. Designed and manufactured in Europe. Built to last a lifetime in the field.

Detailed functionality

SubGHz:

  • Optimised Performance: Performance gains of 10x over built-in SubGHz module + antenna.
  • Extended Range: Optimised dual-antennas allows for >100m of line-of-sight SubGHz operations.
  • Signal Capture / Analysis: Enhanced signal capture, analysis, replay and export on dedicated dual-radios, directly from within the FlipperZero SubGHz app.
  • Enhanced RF Remote Cloning: Dedicated off-board radio modules & optimised antennas allows for 10x performance during remote capture, emulation and cloning.
  • Dual SubGHZ Modules: Dual CC1101 modules allowing for simultaneous RX/TX on 433MHz and 868MHz.
  • SubGHz Wardriving: Log, timestamp and geo-stamp detected RF Signals via inbuilt GPS.

2.4GHz:

  • IoT Scanning: Detect IoT devices using 2.4GHz protocols (Smart Home Devices, Mesh Networks, Drones, Remote Control Devices, etc)
  • Protocol Analysis: Capture, decode and analyze 2.4GHz protocol traffic.
  • IoT Vulnerability Scan: Search for potentially vulnerable IoT devices.
  • MouseJacker: Take control over wireless mice using the 2.4GHz frequency.

Wifi:

  • AP Scanning: Detect nearby WiFi networks.
  • Station Scanning: Monitor connected WiFi clients.
  • Beacon Spam: Broadcast customizable SSID beacons.
  • Deauthentication Attacks: Disconnect clients from specific networks.
  • WiFi Capture: Log probe requests, beacon frames, deauth packets, and raw data (requires SD card or compatible storage).
  • Evil Portal: Set up a fake WiFi portal with a custom SSID and domain.
  • Pineapple Detection: Detect Wi-Fi Pineapples and Evil Twin Attacks.
  • Web-UI: Built-in interface for changing settings and sending commands easily.
  • Wifi Wardriving: Log, timestamp and geo-stamp detected APs and Beacons via inbuilt GPS.

BLE:

  • BLE Scanning: Detect BLE devices, including specialized modes for AirTags, Flipper Zeros, and more.
  • BLE Packet Capture: Capture and analyze BLE traffic.
  • BLE Wardriving: Map and track BLE devices in your vicinity.
  • BLE Device Spam: Spoof/spam BLE accessories to nearby devices.
  • BLE Wardriving: Log, timestamp and geo-stamp detected beacons and devices via inbuilt GPS.

What's included

  • 1x Feberis Pro
    • 2x CC1101 Radio Modules (433MHz + 868MHz)
    • NRF24 radio module (2.4 GHz)
    • ESP32 microcontroller with BLE & WiFi (2.4 GHz)
    • GPS module
    • 7x Status LEDs
    • 4x Configuration Switches
  • 4x External Antennas
    • 1x 433MHz : 3dBi Gain
    • 1x 868MHz : 3dBi Gain
    • 1x 2.4GHz (Wifi): 8dBi Gain
    • 1x 2.4GHz (NRF): 3dBi Gain
  • 1x GPIO Protective Cover

Feberis Pro Resources

Cart • 0

Your cart is empty