Salta il contenuto

Scroll Indicator

Proxmark Basics: Updating Firmware on Windows & Linux

Proxmark Basics: Updating Firmware on Windows & Linux

This video comes from Lab401 contributor Dominic Villeneuve of DHack Security, and is part of the Proxmark Basics series.

Episode 3 in the Proxmark Basics series gets in-depth with the Proxmark 3 RDV4.01 - the cornerstone of RFID research.

The Proxmark 3 has evolved significantly over the years, leaving a trail of incomplete and outdated information, specifically in regards to updating firmware.

Updating firmware depends on the hardware you're running, the modules it uses, and the operating system that you use.

If you're using Windows, check out the Proxmark 3 Windows Firmware update tutorial:

If you're using Linux, check out the Proxmark 3 Linux Firmware update tutorial:

Tools Used:

Episode Resources:

Articolo precedente Proxmark Basics: Cloning MIFARE
Articolo successivo Proxmark 3 Basics: Card Identification

Lascia un commento

I commenti devono essere approvati prima di pubblicazione

* Campi obbligatori