Proxmark Basics: Updating Firmware on Windows & Linux

Publicado por Lab401 Steve en

This video comes from Lab401 contributor Dominic Villeneuve of DHack Security, and is part of the Proxmark Basics series.

Episode 3 in the Proxmark Basics series gets in-depth with the Proxmark 3 RDV4.01 - the cornerstone of RFID research.

The Proxmark 3 has evolved significantly over the years, leaving a trail of incomplete and outdated information, specifically in regards to updating firmware.

Updating firmware depends on the hardware you're running, the modules it uses, and the operating system that you use.

If you're using Windows, check out the Proxmark 3 Windows Firmware update tutorial:

If you're using Linux, check out the Proxmark 3 Linux Firmware update tutorial:

Tools Used:

Episode Resources:


Compartir esta publicación



← Publicación más antigua Publicación más reciente →


0 comentarios

Dejar un comentario

Por favor, tenga en cuenta que los comentarios deben ser aprobados antes de ser publicados