Full Range of Proxmark 3 RDV4.01 Accessories have arrived!

by Lab401 Steve August 31, 2019

After months of development, RRG has released its fully revised range of hardware and accessories for the Proxmark 3.

Proxmark 3 RDV4.01
Updated routing, improved connectivity, stabilised components and the upgraded HF & LF antennas, the RDV 4.01 is the most advanced Proxmark platform available.

Proxmark 3 "Blueshark" BLE & Battery Module
The "Blueshark" module also contains a battery, transforming your Proxmark 3 RDV4.01 and 4 into a fully-standalone pentesting device.

The Proxmark 'standalone' mode is fully supported, and the CNC'd aluminium case acts as a heatsink, further improving performance of your device.

Proxmark 3 Long Range LF Antenna Pack
There have been significant upgrades made to the LF antennas, notably the introduction of the "Q-Switch" and "F-Switches".

The F-Switch allows for targeting specific frequencies (125KHz or 134KHz), while the Q-Switch allows optimising the antenna sensitivity for specific tag types or operations.

The Low Frequency Antenna Pack contains two antennas, Standalone and Long Range, giving reading and sniffing distances up to 130mm.

Proxmark 3 Long Range HF Antenna Pack
The HF antennas have also been updated and improved, allowing for read, write and sniff operations up to

The Low Frequency Antenna Pack contains two antennas, Standalone and Long Range, giving reading and sniffing distances up to 120mm.

Proxmark 3 4.01 Antenna Upgrade Pack
If you have a Proxmark 3 RDV4, you can upgrade your existing build-in antennas easily and cheaply to the new versions.

We're very happy to supply our customers with the full range of high-quality accessories in the Proxmark Range. Should you have any questions, please contact us.

Related articles

  • We need to talk about the iCopy-X.

    by Lab401 Steve November 16, 2025
    It's been three years since the iCopy-X's last firmware update. Is it still the ultimate RFID device? Has the project been abandoned? We need to talk about the iCopy-X. The Lab401 team flew to China, sat down with the dev-team, and now we need your help to shape the future of the iCopy-X.

  • Building the DigiLab : Behind the scenes

    by Lab401 Steve September 15, 2025
    Check out the complete behind-the-scenes journey of Lab401's DigiLab for Flipper Zero - from initial brainstorming to mass production — including prototype failures, code challenges, and manufacturing lessons learned. The DigiLab is a "magic wand" for electronics, allowing you to feel voltages, hear signals, see frequencies, and poke around directly in the brains of modules and sensors! ✅ Sketches, blueprints and initial planning material✅ Off-the-shelf components vs custom made✅ Designing testing jigs for rapid production testing✅ Behind-the-scenes videos, fumbles and fixes.

  • Building the LightMessenger : Manufacturing, Part 2

    by Lab401 Steve March 23, 2025
    Check out the complete behind-the-scenes journey of Lab401's LightMessenger  for Flipper Zero - from initial brainstorming to mass production — including prototype failures, code challenges, and manufacturing lessons learned. The LightMessenger creates stunning persistence of vision effects with 16 RGB LEDs and an accelerometer, painting text and images through air when swiped - fully open source and open hardware. ✅ Sketches, blueprints and initial planning material✅ Smart component selection in 2025✅ Designing testing jigs for rapid production testing✅ Behind-the-scenes videos, fumbles and fixes.

  • Product Manufacturing with Lab401

    by Lab401 Steve February 12, 2025
    Want to see behind the scenes of making an accessory for the Flipper Zero? Get an exclusive behind-the-scenes look Lab401's development framework for transforming ideas into market-ready devices. Learn about our accessory "Product Metric"'s four core requirements: crystal-clear use cases, plug-and-play functionality, open-source expandability, and built-in educational value. The development process spans five critical phases from conceptualization through mass production. ✅ Pre-production planning prevents costly manufacturing mistakes✅ Smart component selection avoids export bans and EOL issues✅ Minimized packaging reduces shipping costs and environmental impact✅ Exhaustive QC procedures ensure customer satisfaction
Back to News
Go to full site