Proxmark Basics: Going Standalone with the BlueShark
by Lab401 Steve February 01, 2022
This video comes from Lab401 contributor Dominic Villeneuve of DHack Security, and is part of the Proxmark Basics series.
Episode 5 in the Proxmark Basics series introduces the BlueShark module for the Proxmark 3 RDV4.01.
The BlueShark module brings standalone functionality to the Proxmark 3 - allowing the device to be controlled wirelessly via Bluetooth.
Whether it's via smart-phone application, Windows, Linux or MacOS, full-device functionality is available via the standard Proxmark client, but without the need for any wires.
This wireless capability is useful for specific tasks, such as implanting the device, or red-teaming without raising suspicion.
However, if you're looking for a dedicated, standalone RFID duplication device, we recommend the iCopy-XS.
This episode concentrates on using your Proxmark 3 wirelessly with the Blueshark in Kali Linux - but the techniques also apply to Windows, Android and MacOS.
Seduce sensors into spilling secrets, with the DigiLab by Lab401 and the FlipperZero. Within minutes, you can peek and poke directly into the memory of millions of modules. In this hands on tutorial, we pull temperature data directly from a LM75A temperature sensor - without anything but the DigiLab and Flipper. No Arduinos, no code, no fuss!
With Lab401's DigiLab and the FlipperZero you can interact directly with millions of modules that use I2C. What took hours now takes minutes! In this in-depth tutorial, we target a BMP280 barometric sensor: detection, identification, communication and data interpretation!
Looking to boost your Flipper Zero’s wireless detection game? Our latest deep-dive shows how the FEBERIS Pro — exclusively at LAB401 — now supports two new firmware features: PineScan and MultiSSID, purpose-built to detect spoofed networks like the WiFi Pineapple. These lightweight detection tools run directly on the ESP32 inside the FEBERIS Pro and identify suspicious access points by analyzing vendor OUIs, tagged parameters, and multi-SSID behaviors — all without needing a full WIDS setup. ✅ Works with Unleashed and Momentum firmware✅ Detects spoofed AP pools used by WiFi Pineapple MK7✅ Fully open-source, ready to flash✅ 5% off with discount code: AMEC0E
@MrDerekJamison deep-dives debugging the LightMessenger. It's a fascinating, detailed foray into the challenges of debugging hardware, lessons learned along the way and tips for open-source project maintainers.