Proxmark Basics: Updating Firmware on Windows & Linux
by Lab401 Steve February 01, 2022
This video comes from Lab401 contributor Dominic Villeneuve of DHack Security, and is part of the Proxmark Basics series.
Episode 3 in the Proxmark Basics series gets in-depth with the Proxmark 3 RDV4.01 - the cornerstone of RFID research.
The Proxmark 3 has evolved significantly over the years, leaving a trail of incomplete and outdated information, specifically in regards to updating firmware.
Updating firmware depends on the hardware you're running, the modules it uses, and the operating system that you use.
If you're using Windows, check out the Proxmark 3 Windows Firmware update tutorial:
If you're using Linux, check out the Proxmark 3 Linux Firmware update tutorial:
@MrDerekJamison deep-dives debugging the LightMessenger. It's a fascinating, detailed foray into the challenges of debugging hardware, lessons learned along the way and tips for open-source project maintainers.
Dive into the behind-the-scenes of how Lab401's LightMessenger accessory was made. Sketches, blueprints, videos from the assembly line, errors and mishaps and much more.
