Skip to content
Feberis Pro

Feberis Pro

€90.00 - €90.00
€90.00 - €90.00

The only RF Pentesting Accessory you need for Flipper : RF, Wifi, BLE, IoT and GPS.
10x performance gains over FlipperZero's built-in modules.
🟢 In Stock
🟢 Dispatched today
Less than 40 minutues remaining for same-day shipping!
⬤ In Stock (🇪🇺 EU & 🇺🇸 US)
⬤ Dispatched
⏰ Order within for same day shipping

Introduction

The Feberis Pro is the ultimate Flipper Zero accessory for IoT pentesting. Its five integrated modules cover all common IoT frequencies, including Sub-GHZ (433+900MHz) and 2.4GHz, enabling pentesting functionality for across multiple protocols, including RF, Wifi, Bluetooth and more.

The Feberis Pro has full functionality out-of-the-box, and supports extended functionality via alternative firmware, and custom functionality via its open-source modules.

This is the newly-released, 2026 version of the Feberis Pro from SAPSAN - and manufactured by Lab401. The FEBERIS PRO has been field-tested used by multiple European Police, Law-Enforcement and Auditing teams.

Discover the Feberis Pro

Quick to deploy, the Feberis Pro is designed for rapid deployment and full-featured functionality to accompany you during all phases of RF pentesting, auditing and research.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7

1. Dual Frequency Sub-GHz

Never miss a signal capture : features dual CC1101 SubGHz modules, allowing for rapid switching between frequencies.

2. WIFI + BLE Audit

Comprehensive, Long-range Wifi + BLE Auditing: AP & Beacon Detection + Spoofing, Sniffing, Packet Capture & Export, Wifi Deauth, and even EvilPortal & Pineapple Detection with custom firmware

3. Integrated GPS

The inbuilt GPS module enables recording pinpoint-accurate coordinates during war-driving sessions.

4. 2.4GHz Auditing

Audit IoT peripherals operating on 2.4GHz with the dedicated nRF24 chipset and long-range antenna. Capture data, detect vulnerable devices, study protocols and build PoCs.

5. Complete IoT Auditing

Integrates five modules, covering standard IoT + RF Remote frequencies. Allows easy switching between modules, or simultaneous modules.

6. Long-Range Antennas

Each module has its own dedicated, optimised antenna, enabling hundreds of metres in line-of-sight performance. Optimised power consumption - no additional battery or power required.

7. Full Software Support

Works out-of-the-box, no development required. Compatible with multiple firmware variants, and supports multiple internal firmware images for extended functionality.

Detailed functionality

SubGHz:

  • Optimised Performance: Performance gains of 10x over built-in SubGHz module + antenna.
  • Extended Range: Optimised dual-antennas allows for >100m of line-of-sight SubGHz operations.
  • Signal Capture / Analysis: Enhanced signal capture, analysis, replay and export on dedicated dual-radios, directly from within the FlipperZero SubGHz app.
  • Enhanced RF Remote Cloning: Dedicated off-board radio modules & optimised antennas allows for 10x performance during remote capture, emulation and cloning.
  • Dual SubGHZ Modules: Dual CC1101 modules allowing for simultaneous RX/TX on 433MHz and 868MHz.

2.4GHz:

  • IoT Scanning: Detect IoT devices using 2.4GHz protocols (Smart Home Devices, Mesh Networks, Drones, Remote Control Devices, etc)
  • Protocol Analysis: Capture, decode and analyze 2.4GHz protocol traffic.
  • IoT Vulnerability Scan: Search for potentially vulnerable IoT devices.
  • MouseJacker: Take control over wireless mice using the 2.4GHz frequency.

Wifi:

  • AP Scanning: Detect nearby WiFi networks.
  • Station Scanning: Monitor connected WiFi clients.
  • Beacon Spam: Broadcast customizable SSID beacons.
  • Deauthentication Attacks: Disconnect clients from specific networks.
  • WiFi Capture: Log probe requests, beacon frames, deauth packets, and raw data (requires SD card or compatible storage).
  • Evil Portal: Set up a fake WiFi portal with a custom SSID and domain.
  • Pineapple Detection: Detect Wi-Fi Pineapples and Evil Twin Attacks.
  • Web-UI: Built-in interface for changing settings and sending commands easily.
  • Wifi Wardriving: Log, timestamp and geo-stamp detected APs and Beacons via inbuilt GPS.

BLE:

  • BLE Scanning: Detect BLE devices, including specialized modes for AirTags, Flipper Zeros, and more.
  • BLE Packet Capture: Capture and analyze BLE traffic.
  • BLE Wardriving: Map and track BLE devices in your vicinity.
  • BLE Device Spam: Spoof/spam BLE accessories to nearby devices.
  • BLE Wardriving: Log, timestamp and geo-stamp detected beacons and devices via inbuilt GPS.

What's included

  • 1x Feberis Pro
    • 2x CC1101 Radio Modules (433MHz + 868MHz)
    • NRF24 radio module (2.4 GHz)
    • ESP32 microcontroller with BLE & WiFi (2.4 GHz)
    • GPS module
    • 7x Status LEDs
    • 4x Configuration Switches
  • 4x External Antennas
    • 1x 433MHz : 3dBi Gain
    • 1x 868MHz : 3dBi Gain
    • 1x 2.4GHz (Wifi): 8dBi Gain
    • 1x 2.4GHz (NRF): 3dBi Gain
  • 1x GPIO Protective Cover

Feberis Pro Resources