› Academy › #pentestips - Proxmark3 Rdv4: How Deal with problematic tags ? It's often that some tags don't respond correctly to the proxmark commands .
One very common problem is that the tag is actually too close to the antennas of the proxmark.
In this case, the trick is very simple: just place a "spacer" between the antenna and the tag , and run your commands again.
You like the #pentestips ?
Make sure to subscribe to our youtube channel
Do you have #pentestips to submit yourself?
We would love to partner with you, contact us at support@lab401.com
LightMessenger : Debug deep-dive with Derek by Lab401 Steve February 26, 2025 @MrDerekJamison deep-dives debugging the LightMessenger. It's a fascinating, detailed foray into the challenges of debugging hardware, lessons learned along the way and tips for open-source project maintainers.
Building the LightMessenger : Product Manufacturing, Part 2 by Lab401 Steve February 19, 2025 Dive into the behind-the-scenes of how Lab401's LightMessenger accessory was made. Sketches, blueprints, videos from the assembly line, errors and mishaps and much more.
Wifi Pineapple Portals with Amec0e by Lab401 Steve April 24, 2024 Hands on with Pineapple Portals: Build a Captive Portal from scratch, with this in-depth guide from amecoe.
Dive into RFID Fuzzing with Flipper Zero, the RFID fuzzer app. by Lab401 Steve September 08, 2023 Curious to know how RFID works and its security? Dive in as we show RFID fuzzing with Flipper Zero.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
