LAB401 ACADEMY: Getting started with the Proxmark 3 & Low Frequency Tags
INTRODUCTION:
First in a series by renowned RFID & Proxmark expert, iceman.
Dive under the hood of the Proxmark 3 and Low Frequency tags. This tutorial covers the basics of setting up your device to work with LF tags, and puts the spotlight on the intricacies of scanning, plotting, importing, exporting and demodulating LF tags.
Subjects covered:
Getting Started - Checking your hardware - Client Commands & Shortcuts - Using Help
Working with Low Frequency Tags - Demodulation & Unknown Tags - Save / Load / Plot Tag Data - Determine Tag Types
Interested in getting started with these tools? We've made the Pentester Packthat contains all the tools from this tutorial - and some extra Magic Mifare cards.
Buying in a pack gives a massive saving of 66 Euros - check outthe pack here.
Check out the video below.
Many thanks to iceman - stay tuned for more tutorials coming soon in this series.
Seduce sensors into spilling secrets, with the DigiLab by Lab401 and the FlipperZero. Within minutes, you can peek and poke directly into the memory of millions of modules. In this hands on tutorial, we pull temperature data directly from a LM75A temperature sensor - without anything but the DigiLab and Flipper. No Arduinos, no code, no fuss!
With Lab401's DigiLab and the FlipperZero you can interact directly with millions of modules that use I2C. What took hours now takes minutes! In this in-depth tutorial, we target a BMP280 barometric sensor: detection, identification, communication and data interpretation!
Looking to boost your Flipper Zero’s wireless detection game? Our latest deep-dive shows how the FEBERIS Pro — exclusively at LAB401 — now supports two new firmware features: PineScan and MultiSSID, purpose-built to detect spoofed networks like the WiFi Pineapple. These lightweight detection tools run directly on the ESP32 inside the FEBERIS Pro and identify suspicious access points by analyzing vendor OUIs, tagged parameters, and multi-SSID behaviors — all without needing a full WIDS setup. ✅ Works with Unleashed and Momentum firmware✅ Detects spoofed AP pools used by WiFi Pineapple MK7✅ Fully open-source, ready to flash✅ 5% off with discount code: AMEC0E
@MrDerekJamison deep-dives debugging the LightMessenger. It's a fascinating, detailed foray into the challenges of debugging hardware, lessons learned along the way and tips for open-source project maintainers.